 |
| |
樹脂刮刀 Resin Wiper
Dazz 3D L120 Pro包含有效的樹脂刮刀，可清除顆粒並改善打印的一致性和質量。
Dazz 3D L120 Pro includes an effective resin wiper to remove particulates and improve print consistency and quality.
|
|
|
| |
樹脂填充系統 Resin Refill System
用戶只需要將1瓶樹脂倒置到Dazz 3D L120 Pro就可以了！打印大型模型時，樹脂會根據需要自動填充。
Users simply need to put 1 bottle of resin upside down into Dazz 3D L120 Pro and that’s all! The resin refills automatically as needed when printing large models.
|
|
|
 |
 |
| |
簡單操作 Simple Operation
Dazz 3D L120 Pro擁有7英寸觸摸屏顯示器，用戶可以通過簡單的觸控更改打印設置並追蹤打印狀態。
With the deluxe 7'' touchscreen monitor on Dazz 3D L120 Pro, users can change print settings and track printing status anytime with just a simple touch control.
|
|
|
| |
安全打印 Safe Printing
Dazz 3D L120 Pro的空氣淨化系統包括一個低速風扇和一個活性炭過濾器，以去除超細顆粒和難聞的氣味，從而實現更安全的打印環境。
The Air-purification system of Dazz 3D L120 Pro includes a low-speed fan and an activated carbon filter to remove ultra-fine particles and unpleasant fumes for a safer printing environment.
|
|
|
 |
 |
| |
打印速度快 Fast Print Speed
Dazz 3D L120 Pro擁有高精度，但不會影響打印速度。 發光速率比一般光固化樹脂3D打印機快3.8倍。 打印速度高達每小時12-36毫米。
High precision, yet not compromising on printing speed. The light rate is 3.8 times faster than normal light-cured resin 3D printer. The printing speed is up to 12-36 mm/hr.
|
|
|
| |
高效能軟件 High Efficiency Software
DDStarter軟件不僅可以協助支撐生成和模型切片，而且還提供同時控制多台3D 打印機的平台，幫助您實現批量生產管理。
The software DDStarter not only provides support generation algorithm and slicing, but also be able to control several machines at same time. All these functions can help you implement batch production management.
|
|
|
 |