Dazz 3D S130

維護成本低 Low Maintenance Cost

大多數光固化打印機的樹脂槽需要頻繁更換，Dazz 3D S130 樹脂槽底部增加了一層特殊離型膜，最大程度減輕了激光對樹脂槽的破壞，相比普通樹脂槽壽命提高了30倍以上！大大降低了用戶使用和維護成本。

Most SLA 3D printers have a consumable resin tank that requires replacement after every 2L of resin printed. Dazz 3D patented resin tank is coated with a special release film which increase the life span by 30x reducing overall maintenance cost of the resin tank.

用戶友好界面 User Friendly Interface

為Dazz 3D S130設計配套3D打印軟件的時候，目標是讓軟件既具有強大的功能，同時保持至簡的操作界面，經過不斷升級改良，Dazzle-3D軟件給客戶以最舒適的使用體驗。

The software Dazzle-3D is developed with easy navigation which provides powerful functions such as support generation algorithm and slicing. Dazz 3D dedicated to user needs and focused on enhancing user experience.

實時顯示 Real Time Monitor

Dazz 3D S130可根據層厚和模型總體積精確計算出打印所需時長，實時顯示打印時間，讓您輕鬆掌握打印節奏，合理安排時間。

The real time monitor tracks product print cycle accurately.

雷射系統 Laser System

Dazz 3D S130配備了最小斑點為0.07毫米的激光器，最快以每秒2.5米的速度掃描光敏樹脂，清晰的細節、光滑的成型表面和極快速度，三者皆可完美體現！

Dazz 3D S130 has a very small spot diameter of 0.07mm. It can achieve incredibly fine details over the entire build platform with no distortion. Fast moving UV laser beam with closed loop Galvo Scanner cures liquid resin for ultra-smooth 3D printed parts.